Arrma Outcast Stunt Truck 4WD 6S BLX 1:8 Orange 2018 - C-AR106033
Out Of Stock
OUTCAST 6S goes where it wants, which is anywhere it can express its attitude. OUTCAST 6S is a rebel, designed to break conventions. OUTCAST 6S is a dedicated action machine which will make YOU an RC truck stunt hero.
OUTCAST 6S boasts a strong composite center body support for added protection when the action gets upside-down. High-wall composite dirt guards at the front of the chassis protect the electronics and the center transmission.
Designed to STUNT.
The short wheelbase of the OUTCAST 6S Stunt Truck means it performs wheelies, flips and tricks with ease. A wheelie bar is integrated into the wing mount. It allows long, high angled wheelies. A scale rear wing aids high speed stability and adds to the super-cool looks.
The all-new battery tray in the OUTCAST 6S model holds your batteries in TIGHT.
Two hook-and-loop straps, fitted perpendicular to each other, provide a secure fit for your batteries. Secure fitting means batteries can be safely mounted side-by-side or one on top of the other.
The battery tray incorporates a balance plug stowage area. Battery balance plugs are held in place with a rubber strap, keeping them away from rotating parts.
Wire routing clips fit to the long hook-and-loop strap and keep battery to ESC wires away from rotating parts of the model. The front upper brace of the battery adjusts itself to the height of your battery packs.
dBoots 'Back-Flip' multi-surface tires provide awesome traction allowing you to flip, grip and perform tricks. They are mounted on strong and tough five-spoke wheels.
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through. ARRMA waterproof electronics are ready for action.
NEW 4mm shock shafts
Waterproof ARRMA BLX185 ESC 3/4/6S with LiPo cutoff (programmable)
ARRMA BLX4074 2050kV 3-6S 4-pole brushless motor
Waterproof ADS-15Mv2 high torque metal gear servo (15 kg/0.12 sec)
Tactic TTX300 2.4 GHz 3-channel SLT RC system with EPA
Tactic TR326 3-channel HV-receiver (7.4 V)
Sealed receiver box
Aluminium chassis plate
Aluminium shock towers
Oil-filled threaded 16 mm aluminium Big Bore shocks
Aluminium motor mount
Aluminium reinforced composite hanger blocks
Complete metal drive train
Three oil-filled metal gear differentials
Innovative easy access gearbox, front & rear
Steel front CVD joints
Full set of ball bearings
Aluminium 17 mm drive hexes
Front pivot ball suspension system
Rear independent suspension
Sway bars front & rear
Machined steel turnbuckles
Adjustable battery tray for different types of LiPo & NiMH batteries
New taller dirt guards to stop dirt entry through front wheel arch
Massive roll cage and front bumper
Pre-glued dBoots 'BACK-FLIP MT 6S' tyres on black 5-spoke HD-wheels
Stunt Truck wing & reinforced wing mount
High Angle wheelie bar to enable long, controlled wheelie action.
Innovative Body Clip Retainer
Meticulously painted body
Max Speed Possible: (mph) 60+mph / 96+km/h
Power Type: Brushless
Build Status: RTR
Build Configuration Options: Mid Motor
Drive Type: 4WD
Vehicle Type: Stunt Truck
Length: 540mm / 21.26"
Wheelbase: 328mm / 12.91"
Ride Height: 47mm / 1.85"
Front Width: 461mm / 18.15"
Rear Width: 461mm / 18.15"
Height: 230mm / 9.06"
Locking Diffs: No
Number of Differentials: 3
Weight (No Battery): 4.86kg / 10lbs 11oz
Battery Max Dimensions: 158x48x70mm / 6.22x1.89x2.76"
Four (type AA) batteries
4S/6S (2x2S/2x3S) LiPo battery with XT-90 Plug
For 60+ MPH a MOD 1 16t Pinion Gear is required
N.B. It is recommended that high specification good quality battery packs are used, low quality battery packs may cause running issues.